HydraLine - modern alternative to conventional steel brake tubing

Why HydraLine (Flexible Stainless Steel Braided Brake Line)?

HydraLine is flexible stainless steel braided brake line which outlasts conventional steel brake tubing due to its durable material in harsh environments.

Quicker to fit up, with no flaring required on tubing, HydraLine takes about 1/5th of the time to fit in comparison to conventional brake tubing. There are also less joins than conventional steel brake tubing, decreasing fitting time, and adds to the strength and durability.

HydraLine can be installed by sliding the flexible line up the box section of the trailer and pulling through holes where required. This is not only a neater finish to the trailer, but also means the brake line is protected inside the trailer.

HydraLine kits available:

Kits available to suit different length and type of trailers as well as number of axles.

Single Axle Kits to suit most:

  • Camper / box trailers (Part# HL2500-1)
  • Boat & large camper / box trailers (Part# HL3500-1)
  • Boat Trailers up to 7m (23ft) (Part# HL4500-1)
  • Boat Trailers up to 7m (23ft) (Part# HL5500-1)

Tandem Axle Kits to suit most:

  • Box Trailers (Part# HL2500-2)
  • Boat Trailers up to 6m (20ft) (Part# HL3500-2)
  • Boat Trailers up to 7m (23ft) (Part# HL4500-2)
  • Boat Trailers up to 7m (23ft) (Part# HL5500-2)
  • Boat Trailers up to 8m (26ft) (Part# HL6500-2)
  • Boat Trailers up to 9m (30ft) (Part# HL7500-2)

Tri Axle Kits to suit most:

  • Boat Trailers up to 7m (23ft) (Part# HL5500-3)
  • Boat Trailers up to 8m (26ft) (Part# HL6500-3)
  • Boat Trailers up to 9m (30ft) (Part# HL7500-3)

HydraLine

Related Products

Brake Fluid
Enviro Gold Brake Fluid

Marinised Callipers
Hydraulic PBR Marinised Callipers

HydraStar HBA Series
Electric over Hydraulic Brake Actuator



Privacy Statement  |  Terms Of Use
Copyright 2010 by Direct Source Australia Pty Ltd.